About
Applies to: InventoryIQ
In InventoryIQ, Finaloop's inventory management product, a shipment won't link to a purchase order (PO) for one of five reasons: the PO has no production start date, the group or shipment is already linked, the dates are out of order, a name is already taken, or the books for that year are closed.
You add a shipment to a PO through a PO shipment group: the items from one PO that travel together. You create groups in the PO's Shipment groups section, then link each group to one shipment with Link to shipment or Add shipment. The steps are in Managing your POs in Finaloop.
Finaloop shows each message as a tooltip when you hover a greyed-out button or a red warning icon, or in the red banner at the top of the PO after you click Save. Each message has its own heading, written exactly as it appears in the app, with why it happens and how to fix it.
Symptoms
I can't select a PO's group when I add groups to a shipment
A shipment is greyed out in Link to shipment
The PO or shipment won't save because of a date
My shipment or group name is rejected
A group's buttons are greyed out with a message about closed books
The PO won't save and the Shipment groups section shows a red icon
1. The PO has no production start date
The PO has not entered production yet. Please update the PO (production start date) in order to link it to the shipment.
Why it happens: You're adding PO shipment groups to a shipment, and that PO has no Production started on date. A shipment can only carry inventory your vendor has started producing.
How to fix it:
In Inventory → Supply chain → Purchase orders, open the PO.
In the Status section, enter the Production started on date.
Click Save.
Back on the shipment, click Add PO shipment group and select the group.
The group is now selectable and its items appear on the shipment.
Production start date is required when a shipment is linked
Why it happens: A group on this PO is linked to a shipment, but Production started on is empty, so the PO can't save.
How to fix it: In the Status section, enter the Production started on date, then click Save. The date picker opens once Placed on has a date, and you can't clear it after the PO ships (the button shows Can't be empty if the PO has been shipped.).
Add placed date
Why it happens: Every PO you save, other than a draft, needs a Placed on date, and Production started on stays greyed out until it has one.
How to fix it: Enter the date you sent the PO to your vendor in Placed on, then click Save. Placed on has no impact on your books.
2. The group or shipment is already linked
This PO shipment group is already linked.
Why it happens: Each PO shipment group links to one shipment. This group is already on this shipment or on another one.
How to fix it: If the items are really on a different shipment, open the PO, click Unlink on the group, and click Save. Then add the group to the right shipment. To ship part of the items separately, click Add group on the PO and enter those quantities in the new group instead.
This group is unavailable because another group from the same PO is already selected. Each shipment can only include one block per PO.
Why it happens: Each shipment can include only one group from the same PO. The message names the group that's already selected, for example GRP-2.
How to fix it: Put every item from that PO that travels on this shipment into one group. On the PO, raise the Shipped quantities in the group that's linked, delete the extra group, and click Save.
This shipment is already linked to another group from this PO
Why it happens: In the Link to shipment drawer on a PO, a shipment that already holds another group from the same PO is greyed out and shows Linked to with that group and PO. It's the same one-group-per-PO rule.
How to fix it: Add these quantities to the group that's already linked to that shipment, or pick another shipment.
No shipments found
Why it happens: The Link to shipment drawer lists your shipments except warehouse transfers. Your search or filters, such as Show available to link only, may hide the one you need.
How to fix it: Click Reset all next to the filters icon and search by shipment number again. If the shipment doesn't exist yet, close the drawer and click Add shipment on the group to create it.
3. The dates are out of order
A PO's dates have to run in order: Placed on, then Production started on, then the shipment's Shipment date, then the receipt's Received date. The date pickers grey out dates that would break the order.
Shipping date cannot be before the production date
Why it happens: The shipment's Shipment date is earlier than the Production started on date of a PO in it. The message shows that production date. If you change dates on the PO instead, the same rule shows in a Couldn't save the purchase order message naming the shipment and the PO.
How to fix it: Set the Shipment date on or after the production date, or move the PO's Production started on date back, then click Save.
Production started date must be on or before the earliest shipment date
Why it happens: On the PO, the Production started on date is later than the earliest linked shipment's date. The message shows both dates. Placed on follows the same rule, with a message that starts with Placed date.
How to fix it: Move the PO date back to on or before the shipment date, or change the shipment's Shipment date, then click Save.
Production start date has to be later than Placed date
Why it happens: Production started on is earlier than Placed on.
How to fix it: Correct whichever date is wrong and click Save.
Received date must be on or after the shipment date.
Why it happens: The receipt's Received date is earlier than the shipment's Shipment date. If you move the shipment date instead, you'll see Shipping date cannot be after the receipt date.
How to fix it: Set the Received date on or after the Shipment date, or move the Shipment date earlier, then click Save.
4. The name is already taken
A shipment with this name already exists in the system.
Why it happens: Shipment names are unique across your company.
How to fix it: Change the name at the top of the shipment and click Save.
A shipment with this name was already added on this PO
Why it happens: You created two shipments from the same PO with the same name, and neither is saved yet.
How to fix it: Give the new shipment a different name and click Save.
A shipment group with this name already exists
Why it happens: Group names are unique within a PO, whatever the capitalization. An empty name shows Add group name.
How to fix it: Rename the group on its card and click Save.
5. The books for that year are closed
Your 2025 books are closed. If you wish to make any changes, please contact Finaloop support via chat or email.
Why it happens: The group's linked shipment has a Shipment date in a year whose books are closed, so the group's quantities, Unlink and delete are locked. The year in the message is that year. A shipment dated before your InventoryIQ start date locks with your start year.
How to fix it: You can always click Add group, even on a locked PO, and link a shipment dated in an open year. A group with no shipment linked is never locked. To change a shipment in a closed year, contact us and include the PO number.
6. The PO won't save because of a shipment group
These messages show on the group's red warning icon and in the banner at the top of the PO after you click Save. The Shipment groups heading shows At least one shipment group has issue.
Shipment group must be linked to a shipment
Why it happens: A group has items but no shipment.
How to fix it: On the group, click Link to shipment or Add shipment, or delete the group if nothing has shipped yet. Then click Save.
① Add group, ② Link to shipment, ③ Add shipment.
Shipment group must have at least one item
Why it happens: Every Shipped quantities field in the group is 0.
How to fix it: Enter the quantity of each item on that shipment, or delete the group, then click Save.
Shipped items can't exceed total items quantity
Why it happens: Your groups add up to more units of an item than the PO ordered. The item's Quantities count turns red, for example 120/100.
How to fix it: Lower the Shipped quantities in the groups, or raise the ordered quantity if your vendor sent more, then click Save.
You can add more PO shipment groups after saving this shipment from the shipment page.
Why it happens: A shipment you create from a PO with Add shipment starts with that one group, and it shows Pending until you save the PO.
How to fix it: Click Save on the PO. Then open the shipment in Inventory → Supply chain → Shipments and click Add PO shipment group to add groups from other POs.
A selected PO shipment group does not fit this shipment. Review the quantity matches and try again.
Why it happens: The shipment was synced from your Amazon, third-party logistics (3PL) or warehouse management system (WMS) connection, and the group's items or quantities don't match what the warehouse reported.
How to fix it: Pick the group whose items match the synced shipment, or adjust its Shipped quantities. See Automatically Syncing Shipments, Receipts, & Transfers.
I don't see Add group on my PO
Why it happens: On a new PO, Add group sits in the middle of the empty Shipment groups section, and it moves to the top right once you have a group. Dropshipping POs, which Finaloop creates for you, don't show it, because your supplier ships straight to your customers.
How to fix it: Nothing to fix on a dropshipping PO. On a regular PO, use the button in the middle of the section.
Related articles
Need help?
If a shipment still won't link, reach out to our Support team through chat or at [email protected], and include the PO number, the shipment number and the exact message you see.

